The URL can be used to link to this page

Home My WebLink About05.b Standard Specs - Approved Materials List for BOARD PKGj 0 0 m 0 1 L A UNK a a MATERIALS LIST STANDARD SPECIFICATIONS CENTRAL CONTRA COSTA SANITARY DISTRICT Table of Contents BEDDING AND BACKFILL MATERIALS ........................................... ..............................4 CAST METAL PRODUCTS .............................................................. ............................... 5 CAST -IN -PLACE CONCRETE ......................................................... ............................... 5 COUPLINGS..................................................................................... ..............................6 GEOTEXTILE FABRIC ...................................................................... ..............................8 HOUSE SEWERS: 4" AND 6" ........................................................... ..............................9 JOINT RESTRAINT SYSTEMS ........................................................ .............................10 MAIN SEWERS: LESS THAN 18" .................................................... .............................10 MISCELLANEOUS APPROVED MATERIALS ................................. .............................11 OVERFLOW PROTECTION DEVICES ............................................ .............................13 PIPE FITTINGS: LESS THAN 18" SEWERS .................................... .............................14 PRECAST PRODUCTS .................................................................... .............................14 PUMPSYSTEMS ............................................................................. .............................15 READY -MIX DESIGNS ..................................................................... .............................16 REINFORCED CONCRETE UTILITY BOXES ................................. .............................17 TAPS................................................................................................ .............................18 2 Sixteenth Bend Wye Approved Fittings Long Sweep Quarter Bend (Clean Out Only) Reducing Combination Note: Other fittings may be accepted under special use approval. Contact the District Inspector for such circumstances. All fittings to be four inch (4 ") or larger. 1 Combination Wye and (118) Bend Eight Bend Two Way Combination (Clean Out Only) Reducer P Trap San Tee Bedding and Backfill Materials Material Type(s): Bedding Type, Backfill Description: TYPE MATERIAL DESCRIPTION CLSM • Controlled Low Strength Material • Drain or Foundation Rock • Crushed stone or gravel Coarse (Not mined alluvial material) • Minimum of 95% crushed particles • Durability Index of 40 • Class 2 Aggregate Base • Newly quarried or recycled material Type 1 (Not mined alluvial material) • Three - quarter (3/4) inch maximum grading • Native material from trench excavation Type 3 • Free of vegetable matter, debris and refuse, concrete, stones or clods larger than four (4) inches • Native Material from trench excavation • Particles must not exceed three - quarter Type 3 (3/4) inch in diameter Select • Free of vegetable matter, debris and refuse, concrete, stones or clods larger than four (4) inches Cast Metal Products Material Type(s): Manhole frames, Covers, Rodding Inlets, Adjustment Rings Manufacturer: Cast Metal Products such as Manhole Frames, Covers, Rodding Inlets and Adjustment Rings can be obtained from but are not limited to the following approved manufacturers: 1. D &L Foundry and Supply Phone Number: (707) 557 -4525 2. South Bay Foundry Phone Number: (209) 367 -1940 Cast -in -Place Concrete Material Type(s): Curing concrete Description: Curing compounds shall be white pigmented and resin based. Manufacturer: MANUFACTURER COMPOUND Master Builders MB -429 Burke Company Spartan Cote Cure -Seal Hardener Euclid Chemical Company Super Rez Seal Note: Sodium silicate compounds shall not be used. Couplings Material Type(s): Banded Rubber Couplings Description: For repairs, alterations and house sewers with connections of dissimilar materials. Various approved banded rubber coupling types include those with four (4) clamps and external shear bands. 1. No hub (four (4) clamp only) 2. "Shear Band" 3. Adjustable Repair Coupling Manufacturer: Manufacturers include but are not limited to: 1. Fernco® 2. Mission® 3. Husky® Note: Check with Inspector prior to purchase of material to insure proper coupling is selected for the different pipe types encountered. Mission® Band Seal Joints® Calder Coupling Friatec® Frialen Electrofusion Coupling n . Fernco® Proflex Coupling Couplings Husky® 4 Clamp Coupling Fernco® Strong Back RC Couplings Shear ring and flexible PVC coupling packaged together. Used on pipes 4" to 27" Engineered to connect No -Hub cast iron pipe in applications replacing the less efficient hub and spigot material. Fernco® Stainless Steel Shear Rings Fits all of the 1000 Series Flexible Couplings. Adds extra strength and rigidity. Available for 1.5" to 27" couplings. Fernco® 5000 Series RC Couplings Connect Pipelines of different materials or sizes used in sewer and drain applications. Mission® Adjustable Repair Coupling 7 Fernco® No -Hub Couplings Geotextile Fabric Material Type(s): Geotextile fabric Description: Geotextile fabric for paving and wrapping foundation rock. Make /Model: VENDOR MODEL FABRIC FOR WRAPPING FOUNDATION ROCK Mirafi 60OX US Fabrics US 315 Webtec HD Carthdage Mills FX -66 Amoco 2006 Propex 300 ST S KAP W315 Thrace /Ling GTF 300 FABRIC FOR PAVING Mirafi Mirapave 400 US Fabrics US 90P Webtec OL Carthdage Mills FX -38 OL Amoco 4599 Petromat Propex 381 SKAP GC 130 Thrace /Ling 130 EX House Sewers: 4" and 6" Material Type(s): Pipe Description: Pipe material for house sewers in four (4) and six (6) inch in diameter. 1. PVC Solid Wall —SDR 26 (Solvent Welded Joints) (Bell & Spigot Joints) 2. BS Solid Wall Schedule 40 (Solvent Welded Joints) 3. VCP (Bell & Spigot Joints) (Plain Ended Joints) 4. DIP Class 52 (Bell & Spigot Joints) 5. CIP Class SV (Bell & Spigot Joints) 6. HDPE SDR 17 Gray (Ductile Iron Pipe Size O.D.) (Butt Thermal Fused Joints) (Pipe Burst only or at Inspector's discretion) 7. PVC Solid Wall C900 (Bell & Spigot Joints) Note: HDPE SDR 17 to be used for Pipe Bursting only, or at Inspector's discretion. Material shall be purchased in longest length practicable in order to achieve the minimum amount of pipe joints during construction. 9 Joint Restraint Systems Main Sewers: Less than 18" Material Type(s): Pipe Description: Pipe material for main sewers less than eighteen (18) inches in diameter. 1. PVC Solid Wall —SDR 26 (Bell & Spigot Joints) 2. Ductile Iron CL52— Polywrapped or Polybagged (Bell & Spigot Joints) 3. PVC Solid Wall C900 or C905 (Bell & Spigot Joints) 4. HDPE SR 17 Gray (Ductile Iron Pipe Size O.D.) (Butt Fused Joints, de- beaded) 5. Vitrified Clay (Bell & Spigot Joints) Note: Other materials may be approved /required by CCCSD as necessary for the specific application. Special Approval required. Also material shall be purchased in longest length practicable in order to achieve the minimum number of pipe joints. 10 VENDOR JOINT RESTRAINT SYSTEM American Ductile Iron Pipe "Lok- Fast" Restrained Joint DIP U.S. Pipe "TR FLEX" Restrained Joint U.S. Pipe "Field -Lok 350 Gaskets" PVC BuIIDog Restraint System BuIIDog PVC Pressure Pipe Integrated Joint Restraint System Certain Teed Certa -Lok restrained joint system Main Sewers: Less than 18" Material Type(s): Pipe Description: Pipe material for main sewers less than eighteen (18) inches in diameter. 1. PVC Solid Wall —SDR 26 (Bell & Spigot Joints) 2. Ductile Iron CL52— Polywrapped or Polybagged (Bell & Spigot Joints) 3. PVC Solid Wall C900 or C905 (Bell & Spigot Joints) 4. HDPE SR 17 Gray (Ductile Iron Pipe Size O.D.) (Butt Fused Joints, de- beaded) 5. Vitrified Clay (Bell & Spigot Joints) Note: Other materials may be approved /required by CCCSD as necessary for the specific application. Special Approval required. Also material shall be purchased in longest length practicable in order to achieve the minimum number of pipe joints. 10 Miscellaneous Approved Materials 11 VENDOR PRODUCT NAME Clean Check Extendable Rector Seal® Clean Check Extendable Backwater Valve Backwater Valve D.E. Separation Pentair Pool Products Product # 60 SEP Hayward Pool Products Model # C9002 SEP Tanks Sika /FI System with Sikadur® Injection Gel Epoxy Hilti HIT HY150 Adhesive Anchors Epoxy Adhesive BASF Concresive® 1420 Gel Epoxy Adhesive Anchors BASF Concresive® Paste LPL Expanding — ITW Red Head®, Trubolt Wedge Anchor Hilti Kwik -Bolt 3 Expansion Anchor Type Anchors Galvanizing Field Carboline® Galvanox Repairs Glass Capsule Polyester Resin Hilti HVU Adhesive Capsule Adhesive Anchors HubSettTM Rector Seal® HubSettTM J -K Polysource® External Joint Wrap M -860 Henry® Rubr -Nek External Joint Wrap Manhole ConSeal® CS -50 Liquid Butyl Primer Products ConSeal® CS -101 Butyl Sealant for Precast Structures Henry® RAM -NEK Joint Sealant or Approved Equal Transition Weld -On® ABS to PVC Transition Cement Oatey® ABS to PVC Transition Green Solvent Cements Cement Waterstops Newby Rubber Water Stop Ring or Approved Equal 11 Miscellaneous Approved Materials Anchors ABS ' 'r`!' HVU Adhesive Capsule Clean Check Extendable Backwater Valves Miscellaneous HIT HY150 Adhesive Anchor l� fftrrt ff�� I PVC Transition Cements az�GCniw��ieo�m� .(UMi Waterstop Rings HubSettTM Oatey® ABS -PVC Cement Weld -On® ABS -PVC Cement 12 Overflow Protection Devices Material Type(s): Overflow Protection Devices (OPD) Description: Manufacturer: Overflow protection devices prevent sewage from entering homes and businesses and reroute the spill outside the building. Sewer relief cap can be obtained from the following approved manufacturer: 1. Unlimited Home Solutions LLC. Phone Number: (561) 602 -9123 E -mail: Homesaver1 @bellsouth.net Backflow Mainline Adapt -a -Valve Inspection Chamber Protection with Test -Eze Gate Feature Mushroom Genplex Kelly Backwater Device (No -Hub & IPS) Sewer T Popper TM Stephens Corp Sewer PopperTM model S62 -304 Cap Unlimited Home Sewer Relief Cap Solutions LLC. Backflow Protection Sewer Popper TM OPD Mushroom type OPD Sewer Relief Cap 13 Pipe Fittings: Less than 18" Sewers Material Type(s): Pipe fittings Description: Pipe fittings for pipelines that are less than eighteen (18) inches in diameter. PIPE MATERIAL FITTING DIP WYE Tee — 11.25° Fitting, Mechanical Fittings PVC Solid Wye Tee — Closure Coupling Saddle Tee — 3° Fitting 90 Sweep Elbow VCP WYE Tee 90 Sweep Elbow Saddle Tee Fitting Precast Products Wye Tee Fitting Material Type(s): Precast Products such as Manhole Bases, Barrels, CAPs, Cones, Grade Rings, Paving Rings, Adjustment Rings, Gaskets, Top Slabs, Grease Interceptors, Sampling Boxes and Sand -Oil Interceptors can be obtained from but are not limited to the following approved manufacturers. Manufacturer: L� 1 "' 1. Central Precast (US Concrete Precast Group) Phone Number: (925) 960 -8740 2. Jensen Precast Phone Number: (707) 429 -5500 3. Cook Concrete Products Phone Number: (530) 243 -2562 14 Pump Systems Material Type(s): Pre - Approved Pump Systems, Pipe Description: VENDOR SYSTEM PIPE MATERIAL E -ONE® D- Series, W- Series, HDPE SDR 11 I- Series and G- Series Liberty® 2448 - Series HDPE SDR 11 Note: Complete packages are required for Pre - Approved Pump Systems. This includes a grinder pump, alarm panel, check valve and a tank. Individual parts of Pump System will not be accepted by CCCSD. Models include but are not limited to the ones below, contact CCCSD for special approval of all others. h tltl1✓ �If ii r� E -One® Model D -H071 E -One® Model W -H101 E -One® Model 1 -H091 E -One® Model Gator Grinder 15 Liberty® 2448 Series Ready -Mix Designs Material Type(s): Concrete mixes Manufacturer: Central Concrete Supply Phone Number: (408) 404 -1030 MIX DESIGNATION MIX DESIGN # Controlled Low F35138AA Strength Material Cast -in -place Concrete 1EF115Q1 Cast -in -place Concrete 163115C1 2. Cemex Phone Number: (650) 333 -5357 MIX DESIGNATION MIX DESIGN # Controlled Low 4212893 Strength Material Cast -in -place Concrete 4212798 16 Reinforced Concrete Utility Boxes Material Type(s): Traffic Area, Non - traffic Area Description: MATERIAL TYPE MAKE /MODEL 12" x 12" Drain Box Christy® V12 Box Traffic 10 -3/8" I. D. x 12" Valve Box Christy® or Jensen® G5 Traffic Valve Area Cast Iron Grate (3/8" Max Spacing) Christy® V12-71W Welded Grate H /20 Loading 8" I. D. x 12" Valve Box Christy® or Jensen® F8 Box Non - Traffic 8-1/2" I. D. x 11 -3/4" Drain Box Christy® V1 Drain Box Area 10 -5/8" I.D. x 17-1/4" Drain Box Christy® V9 Drain Box Cast Iron Grate 3/4" Max Spacing) Christy® V1 -71 C Grate and V9 -71 C Grate Note: Graded top of box must be two (2) inches higher than existing pavement Christy® V12 -71 W Welded Grate Christy® K -6004 Grate (Special Order) Christy® V1 -71 C Grate 17 Christy® G5 Box Christy® V12 Box Christy® F8 Box Taps Material Type(s): Taps Description: Approved tap materials with each corresponding type of Main. PIPE MATERIAL MAINLINE TAP . Tap -Tite Fitting ABS ABS Saddle with solvent weld and two (2) stainless steel straps . Fowler Saddle ACP PVC Saddle with Rubber Gasket and two (2) stainless steel straps . Fowler Saddle CIP DIP • Tap -Tite Fitting . PVC Saddle with Rubber Gasket and two (2) stainless steel straps HDPE . Thermal -Fused Saddle Insituform Liner . PVC Saddle with Rubber Gasket and two (2) stainless steel straps . Tap -Tite Fitting PVC • PVC Saddle with Rubber Gasket and two (2) stainless steel straps . PVC Saddle with solvent weld and two (2) stainless steel straps . Fowler Saddle VCP • Tap -Tite Fitting . PVC Saddle with Rubber Gasket and two (2) stainless steel straps Note: All PVC taps may be done by any licensed tapping company. All other existing mainline taps must be done by either Tap -Tite Company or Roto- Rooter Plumbers. ABS Saddle Fowler Saddle HDPE Saddle PVC Saddle W